McSweet (Foshan) Sanitary Ware Co.,LTD

Direct Line0086-13702562803
Shower room maintenance

Click:22  Time:2016-08-09
Use and maintenance of a pulley:
1, push pull type shower door, the sliding block and the sliding wheel in two ways.
2, pulley, slider should pay attention to problems in use:
A, avoid collision force below the movable door, so as not to cause the door off;
B, pay attention to regular cleaning, slide pulley, slider, lubrication (oil or lubricating wax);
The adjusting screw C, adjust the slider, the slider to ensure activities effective bearing and good sliding door.

Two, the maintenance of toughened glass:
1, do not wipe the glass surface with a rough material, to avoid scratches.  
2, do not use sharp objects or strike the surface of the glass, so as to avoid damage;
3, do not use water that day kind of corrosive liquid to clean the glass surface, so as not to damage the surface gloss (especially with print or film glass)

Three, Aluminum Alloy frame and accessories maintenance:
Aluminum Alloy frame and accessories surface after plating, oxidation or electrostatic spraying (white, yellow, red, purple, etc.):
1, can not use corrosive liquids or materials to wipe;
2, can not use rough materials (including toothpaste) wipe the surface;
3, can not use sharp objects or impact surface characterization.   If the stains appear on aluminum surface, please clean water after washing wipe with a neutral solution.
4, pay special attention to
(1) electrostatic spraying products to prevent direct sunlight and the sun, because the resin material and powder will reflect the photosensitive chromophore, spray layer caused by fading;
(2) oxidation coloring products (gold, silver, silver finger, brushed silver surface coloring): this kind of product to antistatic coating on the products are not easy to fade, but its poor hardness, so it cannot use coarse material to wipe the surface, but can not describe the surface with sharp objects.

Four, stainless steel frame and accessories maintenance:
1, the surface of stainless steel dust and easy to remove dirt, use soap, detergent or weak warm water washing.
2, the stainless steel surface of the trademark, film, with warm water, weak detergent, binder composition, use of alcohol or organic solvent (ethyl ether, benzene scrubbing).
3, stainless steel surface grease, oil, lubricating oil pollution, with a soft cloth to wipe clean, then use neutral detergent or ammonia solution or use special detergent.
4, stainless steel surface with bleaching agent and acid liquid, rinse with water immediately, then ammonia solution or neutral carbonated soda solution immersion, finally washed with neutral detergent in warm water.
5, stainless steel has the rainbow lines, is caused by excessive use of detergent or oil, can be washed with warm water and neutral detergent.
6, stainless steel surface dirt caused by rust, available 10% nitric acid or abrasive detergent, also can use the washing and chemical washing.

As long as we use the correct maintenance, can prolong the service life of the shower room, keep the product clean, bright, gorgeous, give you a comfortable shower room.
[ Print] [ Close]
Kenfor Lighting86 job86  trade86  wanggou86 cloud86